likarolo tsa sehlahisoa
Flexible MOQ le phano e potlakileng
0.1m3-200m3
0.8mpa ho isa ho 10mpa
Sistimi e tiileng ea netefatso ea boleng
Tšehetso ea ho iketsetsa
Ts'ebetso e tsoetseng pele ea tlhahiso le tlhahlobo
Theko e utloahalang le ea tlhōlisano
Tiisetso ea boleng ba nako e telele
sehlahisoa parameter
| Mohlala | Bolumo(m3) | Khatello ea ho sebetsa (bar) | Mohlala | Bolumo(m3) | Khatello ea ho sebetsa (bar) |
| 0.3/8 | 0.3 | 8 | 3.0/8 | 3 | 8 |
| 0.3/10 | 0.3 | 10 | 3.0/10 | 3 | 10 |
| 0.3/13 | 0.3 | 13 | 3.0/13 | 3 | 13 |
| 0.3/16 | 0.3 | 16 | 3.0/16 | 3 | 16 |
| 0.3/25 | 0.3 | 25 | 4.0/8 | 4 | 195 |
| 0.5/8 | 0.5 | 8 | 4.0/10 | 4 | 655 |
| 0.5/10 | 0.5 | 10 | 4.0/13 | 4 | 655 |
| 0.5/13 | 0.5 | 13 | 4.0/16 | 4 | 657 |
| 0.5/16 | 0.5 | 16 | 5.0/8 | 5 | 657 |
| 0.6/8 | 0.6 | 8 | 5.0/10 | 5 | 170 |
| 0.6/10 | 0.6 | 10 | 5.0/13 | 5 | 196 |
| 0.6/13 | 0.6 | 13 | 5.0/16 | 5 | 305 |
| 0.6/16 | 0.6 | 16 | 6.0/8 | 6 | 240 |
| 0.6/25 | 0.6 | 25 | 6.0/10 | 6 | 280 |
| 1.0/8 | 1 | 8 | 6.0/13 | 6 | 226 |
| 1.0/10 | 1 | 10 | 6.0/16 | 6 | 262 |
| 1.0/13 | 1 | 13 | 7.0/8 | 7 | 271 |
| 1.0/16 | 1 | 16 | 7.0/10 | 7 | 325 |
| 1.0/25 | 1 | 25 | 7.0/13 | 7 | 490 |
| 1.5/8 | 1.5 | 8 | 7.0/16 | 7 | 338 |
| 1.5/10 | 1.5 | 10 | 8.0/8 | 8 | 338 |
| 1.5/13 | 1.5 | 13 | 8.0/10 | 8 | 388 |
| 1.5/16 | 1.5 | 16 | 8.0/13 | 8 | 498 |
| 1.5/25 | 1.5 | 25 | 8.0/16 | 8 | 630 |
| 2.0/8 | 2 | 8 | 9.0/8 | 9 | 460 |
| 2.0/10 | 2 | 10 | 9.0/10 | 9 | 460 |
| 2.0/13 | 2 | 13 | 9.0/13 | 9 | 505 |
| 2.0/16 | 2 | 16 | 9.0/16 | 9 | 660 |
Ka kopo ikopanye le rona bakeng sa mehlala e meng.
sebopeho sa sehlahisoa
0.3m3
| Bolumo | 0.3 m3 |
| Mocheso oa moralo | 150℃ |
| Khatello ea moralo | 0.8 Mpa |
| Bophahamo ba sejana | 1586 limilimithara |
| Diameter | 550 limilimithara |
| Sekeno sa moea/moullet | 1.5 |
| Valofo ea ho ntša metsi | DN 15 |
1.0m3
| Bolumo | 1.0 m3 |
| Mocheso oa moralo | 150℃ |
| Khatello ea moralo | 1.0 Mpa |
| Bophahamo ba sejana | 2200 limilimithara |
| Diameter | 800 limilimithara |
| Sekeno sa moea/moullet | DN 65 |
| Valofo ea ho ntša metsi | DN 15 |
2.0m3
| Bolumo | 2.0 m3 |
| Mocheso oa moralo | 150 ℃ |
| Khatello ea moralo | 1.0 Mpa |
| Bophahamo ba sejana | 2790 limilimithara |
| Diameter | 1000mm |
| Sekeno sa moea/moullet | DN80 |
| Valofo ea ho ntša metsi | DN 15 |
| Lintho tse bonahalang | SS304 |
80.0m3
| Bolumo | 80 m3 |
| Mocheso oa moralo | 150 ℃ |
| Khatello ea moralo | 0.8 Mpa |
| Bophahamo ba sejana | 11000mm |
| Diameter | 2800 limilimithara |
| Sekeno sa moea/moullet | DN 250 |
| Botenya | 9mm |
| Lintho tse bonahalang | Q345R |
Pontšo ea lihlahisoa
Tanka ea polokelo ea moea e etsa eng?
Tsitsisa khatello ea moea ho fokotsa tšusumetso, moea o pholileng, ho tlosa mongobo o feteletseng, le ho netefatsa hore moea o phalla hantle.
1, Bokhoni ba polokelo: Ho rarolla khanyetsano e ka bang teng ts'ebelisong ea khase ka har'a sistimi ka nako e khuts'oane, 'me ka lehlakoreng le leng, e ka sebelisoa maemong a tšohanyetso ha ho se sebetse hantle ha compressor ea moea kapa maemo a mang a tšohanyetso.
2, moea o pholileng: Ho arola le ho tlosa mongobo, matheba a oli le litšila tse ling moeeng o hatelitsoeng, ho fokotsa mosebetsi oa lisebelisoa tse ling tsa ka mor'a ho phekoloa ka tlas'a marang-rang a lipeipi, ho nolofalletsa mefuta e fapaneng ea lisebelisoa tse sebelisang khase ho fumana boleng bo hlokahalang ba mohloli oa moea. . Tanka ea polokelo ea moea e hahelletsoeng ka har'a li-compressor tse nyane tsa moea e boetse e sebelisoa e le bracket e ntseng e hola bakeng sa 'mele oa compressor le lisebelisoa tse ling.
3, Felisa le ho fokolisa pulsation ea moea: tsitsisa khatello ea tšimoloho le ho netefatsa phallo ea moea e tsoelang pele le e tsitsitseng. (Tlhahiso e tsitsitseng ea khatello ea moea)
4, Eketsa nako ea potoloho: Eketsa nako ea potoloho ea compressor ea moea ho tloha "ho emisa ho qala" kapa "ho laolla" ho fokotsa maqhubu a ho fetoha ha lisebelisoa tsa motlakase le li-valve.
Lintlha tse amehang li bontša hore botumo ba litanka tsa polokelo ea khase likarolong tse sa tšoaneng tsa tlhahiso ea naha le bophelo bo se bo ntse bo phahame haholo. Kaha e khona ho hatella moea 'me e na le letoto la litšobotsi tse kang polokeho, bohloeki, le ho laola habonolo, e' nile ea sebelisoa haholo liindastering tse sa tšoaneng.
tšebeliso ea litanka tsa polokelo ea moea
1, Indasteri ea Lijo: Ts'ebeliso ke litanka tsa polokelo ea khase e se nang oli, haholo-holo e sebelisetsoang ho fana ka matla bakeng sa mechini e tlatsang, mechini e bululang libotlolo, joalo-joalo, ho boloka khatello e tsitsitseng ea ts'ebetso bakeng sa mechini e tšehetsang. Ntle le moo, e boetse e bapala karolo e thusang ho tsamaisa moea, ho pholisa moea, ho fafatsa moea, joalo-joalo.
2, indasteri ea matla: Litanka tsa polokelo ea khase li bapala karolo ea lipalangoang tsa moea, lipalangoang tsa molora o omileng, ts'ebetso ea moea le lisebelisoa tsa ho khanna.
3, indasteri ea semiconductor: Ena ke indasteri e hlahang, moo lisebelisoa tsa wafer oxidation, li-vacuum systems, li-valve tsa pneumatic control, lisebelisoa tsa ho tšoara moea, joalo-joalo kaofela li hloka litanka tsa polokelo ea khase tse ts'oanang ho phetha mosebetsi oa tsona ka katleho.
4, Indasteri ea Tire: Haholo-holo e entsoe ka litanka tsa polokelo ea moea ea tšepe e sa hloekang, karolo ea bona indastering ea mabili e kenyelletsa haholo ho khothaletsa mechini e sehang lithapo, metjhini e hlabang, hammoho le ho kopanya le ho theha moea.
5, Indasteri ea tšepe: ho kenyelletsa khase ea lisebelisoa, ts'ebetso ea matla, ho fofa ha lisebelisoa, thuso ea ts'ebetso, joalo-joalo, kaofela ha li arohane le litanka tsa polokelo ea khase.
6,Indasteri ea Textile: Litanka tsa polokelo ea moea li sebelisoa haholo-holo ho hatella moea ho fana ka matla a hloekileng a khase bakeng sa li-jet looms, mechine ea boholo, mechine ea ho daea le ea ho qeta, mechine ea ho roka, lithunya tse monyang, joalo-joalo. Ka kakaretso, ho sebelisoa litanka tsa polokelo ea moea tse se nang oli.
Mokhoa oa ho khetha tanka ea ho boloka moea
1. Etsa qeto ea tekanyo e fokolang ea tanka ea polokelo ea moea e thehiloeng ho molumo oa ho qeta moea oa compressor ea moea: molumo oa tanka ea polokelo ea moea e lokela ho ba kholoanyane ho feta molumo oa ho qeta; Mohlala, bophahamo ba molumo oa ho tima moea oa compressor ke 0.48m ³/ Minute, ho latela foromo: 1m ³= 1000 litres, mofuta ona o lokela ho sebelisa tanka ea polokelo ea moea e fetang lilithara tse 480 ho etsa bonnete ba hore compressor ea moea ha e qale khafetsa. .
2. Etsa qeto ea boholo ba molumo oa tanka ea polokelo ea moea e thehiloeng ho molumo oa ho qeta moea oa compressor ea moea: Ho molemo hore u se ke ua tsamaisa compressor ea moea nako e telele ntle le ho emisa, kahoo molumo oa tanka ea polokelo ea moea ha oa lokela ho feta makhetlo a mahlano. molumo oa ho tima.
3, Ho phaella moo, khatello e boetse e lokela ho bapisoa le ho khethoa ho latela khatello e phahameng ka ho fetisisa ea alamo ea compressor ea moea. Compressor ea moea e nang le khatello ea lik'hilograma tse 8 e lokela ho ba le tanka ea polokelo ea moea e nang le khatello ea lik'hilograma tse 8, kapa ntho e kholo ho feta 8 lik'hilograma, tse kang 10 lik'hilograma.
Tanka ea polokelo ea moea e kantle ho komporo ea moea ha e khone ho tsitsisa khatello le buffer feela, empa hape e bapala karolo ea bohlokoa eo basebelisi ba bangata ba sa e ele hloko, e leng ho thibela phaephe ea moea e hatelitsoeng hore e se khutlele mokelikeli ka lebaka la ba bang. lebaka nakong ea ho koaloa ha compressor ea moea le ho e tšela ka har'a kompressor ea moea ka lebaka la tšenyo ea eona.
Sistimi ea Tlhokomelo ea Lijana tsa Khatello
1. Tlhokomelo le tlhokomelo ea likepe tsa khatello li tlameha ho khomarela melao-motheo ea "thibelo pele" le "tlhokomelo le ho lokisoa letsatsi le leng le le leng" ho netefatsa tšebeliso e nepahetseng, tlhokomelo e hlokolosi, le ho khomarela tlhokomelo ea letsatsi le letsatsi ho beha likepe tsa khatello ho sebelisoa. 'Me u lule u le maemong a matle a ts'ebetso ho netefatsa ts'ebetso ea eona ea nako e telele e bolokehileng le e tsitsitseng.
2. Pele ho ts'ebeliso ea likepe tsa khatello, li tlameha ho bolokoa ka hloko ho latela litšoaneleho tsa tsona tsa ts'ebeliso le litšoaneleho tse mahareng mosebetsi oa ho lokisa bakeng sa taolo ea tlhokomelo, tlhahlobo ea bots'epehi le ho tiea ha lera le thibelang kutu le liphaephe le manonyeletso a amanang.
3. Lokisetsa lisebelisoa tse hlokahalang tsa tlhokomelo le lisebelisoa tse bonolo.
4. Ha ba koetlisa basebetsi, ba lokela ho tsebisoa ka litšobotsi tsa sebopeho, tšebeliso, le tlhokomelo ea tanka eo ba e sebelisang, hammoho le tsebo ea tšebeliso ea bona, tlhokomelo le ts'ebetso e sireletsehileng. Hape ba lokela ho tseba litsebo tsa ho lokisa letsatsi le letsatsi, ba ba koetlisetse mekhoa e metle ea profeshenale bakeng sa ho hlokomela lisebelisoa tsa tlhahiso, le ho theha mohopolo oa ho ba beng ba khoebo. ts'ebetso ea ts'ireletso, le likarolo tse ling, ho tseba bokhoni ba tlhokomelo ea letsatsi le letsatsi, koetliso ea mekhoa e metle ea litsebi bakeng sa ho hlokomela lisebelisoa tsa tlhahiso, le ho theha maikutlo a beng ba likhoebo.
5. Boloka sejana sa khatello e hloekileng le e hloekileng le tikoloho ea tlhahiso, 'me hang-hang u felise ho lutla leha e le hofe kapa ho lutla.
6. Latela ka tieo mekhoa ea ts'ebetso, 'me basebetsi ha ba lumelloe ho qhaqha kapa ho senya lisebelisoa tsa tšireletso tsa likepe tsa khatello ntle le tumello,
Ho thibetsoe ka thata ho tiisa lihokelo tsa compression kapa ho kokota likepe tse jereng likarolo tsa ts'ebetso nakong ea ts'ebetso, mme ts'ebetso e tsoetseng pele ea hlokahala.
7. Ha basebetsi ba fumana maemo a sa tloaelehang tlas'a maemo a tloaelehileng a ts'ebetso, ba lokela ho tseba hang-hang sesosa le ho nka mehato e nepahetseng, 'me ba nke mehato e nepahetseng le ho nahanisisa ka eona hang-hang.
8. Lijana tsa khatello tse sa sebetseng 'me li tiisitsoe bakeng sa bekapo li lokela ho hlokomeloa hantle le ho hlahlojoa ka hloko pele li sebelisoa hape.
LBH
1, Na u fektheri kapa k'hamphani ea khoebo?
Re feme mme re na le Export Right. E bolela feme + khoebo.
2, Mabapi le lebitso la lihlahisoa?
Ka kakaretso, Re sebelisa mofuta oa rona, haeba u kopile, OEM e fumaneha hape.
3, U hloka matsatsi a makae ho lokisa sampole le bokae?
3-5 matsatsi. re ka fana ka mohlala ka ho lefisa thepa. Re tla khutlisa tefiso ka mor'a hore u etse taelo.
4, Mabapi le nako ea tefo le nako ea ho pepa?
Re amohela tefo ea 50% e le depositi le 50% TT pele ho tlisoa.
re ka tsamaisa lijana tse 1 * 40HQ le ka tlase nakong ea matsatsi a 20 kamora ho lefa depositi.